Care
Care instruction for oiled flooring
Its reputation as a high quality, professional brand makes WOCA® a preferred partner of BambooTouch®.
The appearance and durability of BambooTouch® floorings treated with Woca® oils are excellent.
To give your floor a beautiful sheen, we recommend using care products specifically linked to the finish applied to your floor.
The appearance and durability of BambooTouch® floorings treated with Woca® oils are excellent.
To give your floor a beautiful sheen, we recommend using care products specifically linked to the finish applied to your floor.
BambooTouch® offers a range impregnated with a Woca® oil-wax finish.
This finish is applied in the factory and combines resistance, ease of maintenance and renovation. Observe the following instructions to keep it in good condition
This finish is applied in the factory and combines resistance, ease of maintenance and renovation. Observe the following instructions to keep it in good condition
Initial maintenance after fitting
Factory pre-oiled BambooTouch® floors should receive an additional oil treatment immediately after fitting. This treatment provides optimal saturation and your floor will then be very resistant to wear. Flooring treated with Oil-Wax is supplied ready to install. After laying, remove dust or dirt using (using a brush or vacuum cleaner).A. FOR FLOORINGS FOR DOMESTIC USE
If your floor is excessively dirty after application (traces of construction, mud ...) clean first the parquet with Woca® natural soap.Otherwise, proceed directly to the first maintenance by applying the Woca® oil refresher.
B. FOR FLOORINGS FOR INTENSIVE USE (restaurants, shops...)
If your floor is excessively dirty after application (traces of construction, mud ...) clean first the parquet with Woca® natural soap.Otherwise, proceed directly to the first maintenance by applying the Woca® maintenance paste.
After this initial maintenance, use Woca® natural soap for regular cleaning. Never clean with clear water.
NOTE: WHITE WOODEN FLOORS
For white wooden flooring (BambooTouch ® Arctic and Alaska Colour), you must use natural White Soap, White Refresher Oil and White Maintenance paste also available to order via BambooTouch®.
Regular cleaning and care
- Mix 125 ml of natural soap in 5l of cold water
- Clean the floor with a floor cloth or mop which has been slightly wrung out. Immediately afterwards, immerse the floor cloth / mop back into the solution and wring it out well. Then wipe the floor with it again.
If your floor is very dirty, it is advisable to work with 2 buckets: one with soapy water and the other with rinse water.
Major maintenance
Carry out major maintenance of your floor in two steps as with the initial maintenance after fitting. First, use Woca® natural soap and then apply Maintenance Paste, or Oil Refresher depending use.How to remove stubborn stains?
Use Woca® spot remover to remove stubborn stains. Before using the spot remover, test an inconspicuous area to ensure that there are no adverse reactions.- Spray the spot remover evenly over the stain.
- Leave the spot remover for 10 to 20 minutes. Lightly brush the stain using the scrubber or polishing pad until it has dissolved.
- Wipe with a cloth wrung out in lukewarm water.
- When the floor has completely dried, apply the base treatment again (Woca® oil refresher or Woca® maintenance paste) to restore a protective layer.
How to refresh your oiled floor?
To refresh your floor, you can use Woca® Refresher Oil which will also extend the intervals between major maintenance sessions.Further information is available at www.woca.be
